A free-running Manta runs at AcquisitionFrameRateAbs, not at its limit:
rietschen's RGB camera came set to 0.955 fps and delivered 5 frames in 5.2 s.
The gige recipe now writes a short fixed exposure and then the rate, clamped
to the camera's maximum (4.7 fps at 60 MB/s), before auto-exposure goes back
on. The export summary shows the rate set, not the limit, which had read
4.71 fps for a camera running at 0.96.
test hardware env asked for a DHT11 reading at once, but the firmware reads
it every 10 s, the first time 2 s after it starts. install-tower --verify
failed on rietschen 1.4 s into its run, 36 s after the same test had passed.
It now waits one read period for the first reading. Tests 542/542 (mock).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A TarisIR mini (driver = taris) is a second camera source behind a
CompositeCameraSource: the colour camera is asked first, then the thermal one
for its newest frame, and both frames carry the colour frame's timestamp.
Counts are saved 16-bit lossless under TIR/, and the CamEvent gains cal,
missed, tmax, tmed, hotx and hoty (docs/mqtt-api.md). The SDK is declared in
IrbgrabApi.h and loaded with dlopen, so no SDK file is in the repository; a
missing or unreachable camera stays offline (Health cams_offline) while the
scan goes on. scripts/fgc-setcap gives the binary cap_net_raw after a build.
Built and tested in an Ubuntu 22.04 container (mock, MQTT, Vimba+MQTT,
534/534), plus a mock run with RGB/TIR pairs. Not yet run against the camera.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Peter Bochmann
pgdalmeida