33 Commits

Author	SHA1	Message	Date
pgdalmeida	6fa43f1e08	Slow down, then pause, the scan when the tower computer runs hot or cannot keep up	2026-10-08 17:21:58 +02:00
pgdalmeida	cfd8ba9978	Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind	2026-10-05 10:14:53 +02:00
pgdalmeida	ab9fa3dbb0	Let a tower set its encoder scale, and send no speed after a failed homing	2026-09-28 18:21:37 +02:00
pgdalmeida	f4e67666d8	Give the tower three modes, auto, pan and manual, switched by command	2026-09-25 17:50:48 +02:00
pgdalmeida	4a69d65afb	Take any console command over MQTT, and answer it	2026-09-25 16:43:45 +02:00
pgdalmeida	d8d2fee8af	Test the camera with forced dark and bright settings, and recover a camera that stops sending frames	2026-09-24 17:35:37 +02:00
pgdalmeida	5a0515ab13	Test that the camera delivers frames and follows its settings to black and white	2026-09-24 15:47:58 +02:00
pgdalmeida	86f930a671	Add a one-shot test command and a tool that edits the config files safely	2026-09-23 18:52:44 +02:00
pgdalmeida	4049a85b9b	Check the firmware was built with the pins hardware.ini lists	2026-09-23 18:26:14 +02:00
pgdalmeida	816242725a	Add the handshake bring-up runbook (plus the mock/test changes)	2026-09-18 17:36:19 +02:00
pgdalmeida	041ad2a18f	Understand the NEEDCFG state instead of reading it as a dead link	2026-09-18 17:15:16 +02:00
pgdalmeida	842d95eeca	Check every declared value, not just the current	2026-09-18 16:44:08 +02:00
pgdalmeida	522ba072ec	Answer the firmware's NEED lines from hardware.ini	2026-09-18 16:16:04 +02:00
pgdalmeida	1a572cb074	Changed heading logic; added snapshot feature	2026-09-11 17:42:01 +02:00
pgdalmeida	cd8491dcc0	removed Env MQTT topic	2026-09-09 13:43:29 +02:00
pgdalmeida	5fce32aee7	IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup	2026-09-09 12:19:53 +02:00
pgdalmeida	a5ad814260	Camera settings now come from VimbaX profile XMLs; explicit per-camera config	2026-09-04 14:12:05 +02:00
pgdalmeida	bc4d2ec002	Added an expanded connectivity view with MQTT message history	2026-09-02 12:39:21 +02:00
pgdalmeida	f1342965de	Camera is now configured by per-mode files; quality gate removed	2026-08-26 15:52:47 +02:00
pgdalmeida	376e79536c	camera logic improved	2026-08-07 15:04:47 +02:00
pgdalmeida	271b076394	added temperature and humidity sensor (SHT41)	2026-08-05 09:13:16 +02:00
pgdalmeida	c41cb6fc6a	Added camera control	2026-07-13 19:15:38 +02:00
pgdalmeida	d4d1993a25	added extra encoder tracking information	2026-06-29 23:35:45 +02:00
pgdalmeida	c972aba4d3	Anchored yaw to 0-360 degrees range	2026-06-29 22:33:00 +02:00
pgdalmeida	25e39e09f2	IMU configuration readback/control + reworked calibration procedure	2026-06-29 13:12:09 +02:00
pgdalmeida	768993a938	IMU improved expanded view (TUI)	2026-06-29 10:00:16 +02:00
pgdalmeida	9a25bbcc48	added gimbal calibration command, added TUI prompts	2026-06-29 06:27:36 +02:00
pgdalmeida	e33781c545	Integration of IMU	2026-06-24 11:03:28 +02:00
pgdalmeida	df42a4fc69	Fix DUMP serial corruption by pacing USB-CDC output with Serial.flush()	2026-06-23 16:35:42 +02:00
pgdalmeida	0b62fef9c7	added help info	2026-06-23 15:22:31 +02:00
pgdalmeida	14707c62ae	Migrate host to the current firmware serial protocol (counts/MOVE/ST)	2026-06-22 23:44:13 +02:00
pgdalmeida	90f689c829	Add per-category verbatim wire tracing	2026-06-22 22:30:26 +02:00
pgdalmeida	11a2384c53	Modularize into interfaces with real + mock implementations	2026-06-22 12:51:57 +02:00