63 Commits

Author	SHA1	Message	Date
pgdalmeida	5a0515ab13	Test that the camera delivers frames and follows its settings to black and white	2026-09-24 15:47:58 +02:00
pgdalmeida	e8293f736d	Record that tower 111 comes back by itself after a reboot	2026-09-24 15:06:10 +02:00
pgdalmeida	91cc8af915	Rewrite the running and installing guides for how towers are set up now	2026-09-24 14:59:04 +02:00
pgdalmeida	08c749ca06	Finish migrating tower 111, and check only the pins hardware.ini declares	2026-09-24 09:52:14 +02:00
pgdalmeida	6824a0d580	Migrate tower 111's host, and resume capture after a test instead of leaving it stopped	2026-09-24 09:01:05 +02:00
pgdalmeida	b7c80794b4	Record the flash cost on the Delta board, and the reboot check on tower 121	2026-09-23 23:39:28 +02:00
pgdalmeida	53fa96fb54	Start the program at boot through fgc, so the dashboard still works	2026-09-23 22:39:18 +02:00
pgdalmeida	32ea820877	Add an installer that sets up a tower from scratch or repairs one	2026-09-23 21:15:00 +02:00
pgdalmeida	86f930a671	Add a one-shot test command and a tool that edits the config files safely	2026-09-23 18:52:44 +02:00
pgdalmeida	4049a85b9b	Check the firmware was built with the pins hardware.ini lists	2026-09-23 18:26:14 +02:00
pgdalmeida	7a7e7ab0a5	Record tower 111 has no hardware.ini; BOOTSEL and USB preconditions are solved	2026-09-23 16:49:37 +02:00
pgdalmeida	b6308c1eda	Check the tower is running its own settings, not the firmware's fallback	2026-09-23 16:07:07 +02:00
pgdalmeida	12e23a5fb6	Correct what the plans claim is done, and warn that a pull deletes .deploy.env	2026-09-23 08:31:43 +02:00
pgdalmeida	bd3a568508	Send the whole drivetrain on connect, so a restart is enough to retune	2026-09-23 07:36:23 +02:00
pgdalmeida	fd1df9e93a	Say where the log is in the guides an operator actually reads	2026-09-22 18:18:54 +02:00
pgdalmeida	582047d3a2	Keep a log file, so a tower's record outlives the tmux session	2026-09-22 18:15:09 +02:00
pgdalmeida	7ef2abcd4a	Have the setup kit work out the centre a geared-up rig needs	2026-09-21 23:07:44 +02:00
pgdalmeida	57a166c9a4	Warn when the homed travel falls below zero, and say why the centre matters	2026-09-21 23:06:37 +02:00
pgdalmeida	e2bdc8debf	Trust the firmware's reset-cause name over a decode that cannot be right for both boards	2026-09-21 19:03:55 +02:00
pgdalmeida	816242725a	Add the handshake bring-up runbook (plus the mock/test changes)	2026-09-18 17:36:19 +02:00
pgdalmeida	07de495840	Say which LattePanda a tower actually has	2026-09-18 17:25:27 +02:00
pgdalmeida	041ad2a18f	Understand the NEEDCFG state instead of reading it as a dead link	2026-09-18 17:15:16 +02:00
pgdalmeida	6f88b00856	Write the drivetrain block at install, since the firmware now demands it	2026-09-18 17:06:34 +02:00
pgdalmeida	842d95eeca	Check every declared value, not just the current	2026-09-18 16:44:08 +02:00
pgdalmeida	a554a3fd9c	Record the firmware half of the config handshake	2026-09-18 16:42:57 +02:00
pgdalmeida	522ba072ec	Answer the firmware's NEED lines from hardware.ini	2026-09-18 16:16:04 +02:00
pgdalmeida	579c4ec166	Let a declared sensor enable itself, and retire the duplicate flag	2026-09-18 15:57:10 +02:00
pgdalmeida	b5d1fac4cb	Declare axis speed in degrees per second, not VMAX	2026-09-18 15:44:19 +02:00
pgdalmeida	4f57651c9b	Refuse to start when the rig is missing hardware it declares	2026-09-18 14:50:50 +02:00
pgdalmeida	2191a9d8cb	Record the resolved yaw homing and the hand-written drivetrain block	2026-09-18 13:19:32 +02:00
pgdalmeida	5b3662c529	Document the drivetrain keys, the derived degree scale and the homing findings	2026-09-17 17:58:46 +02:00
pgdalmeida	649d0979cf	Record the verified install results and the /tmp hardware.ini trap	2026-09-16 18:38:11 +02:00
pgdalmeida	9b232c3f60	Add a from-scratch tower installation guide with phased bring-up	2026-09-16 18:27:51 +02:00
pgdalmeida	bcf54802cb	Move the hardware plans into the repo, where they can have a history	2026-09-16 18:26:13 +02:00
pgdalmeida	1a572cb074	Changed heading logic; added snapshot feature	2026-09-11 17:42:01 +02:00
pgdalmeida	cd8491dcc0	removed Env MQTT topic	2026-09-09 13:43:29 +02:00
pgdalmeida	8eda0b4a36	Added IMU pitch to CamEvent; Changed IMU reading to before jxl encoding to avoid lag	2026-09-09 13:04:25 +02:00
pgdalmeida	5fce32aee7	IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup	2026-09-09 12:19:53 +02:00
pgdalmeida	9023f79c26	Cover config path anchoring with a test; refresh the camera, TUI and I2C docs	2026-09-04 15:21:25 +02:00
pgdalmeida	a5ad814260	Camera settings now come from VimbaX profile XMLs; explicit per-camera config	2026-09-04 14:12:05 +02:00
pgdalmeida	ef96513b58	MQTT messages working	2026-08-26 17:56:56 +02:00
pgdalmeida	f1342965de	Camera is now configured by per-mode files; quality gate removed	2026-08-26 15:52:47 +02:00
pgdalmeida	02d3f573cf	Image rotation is now configurable via Camera.rotation_deg	2026-08-26 14:14:49 +02:00
pgdalmeida	5053b82811	Scan sweep now always runs front to back instead of ping-ponging	2026-08-26 10:01:16 +02:00
pgdalmeida	4bc5e762e7	Added terminal attachment/detachment	2026-08-07 17:35:32 +02:00
pgdalmeida	376e79536c	camera logic improved	2026-08-07 15:04:47 +02:00
pgdalmeida	48c9aa529d	refactor and bug fixes	2026-08-05 17:00:42 +02:00
pgdalmeida	271b076394	added temperature and humidity sensor (SHT41)	2026-08-05 09:13:16 +02:00
pgdalmeida	c41cb6fc6a	Added camera control	2026-07-13 19:15:38 +02:00
pgdalmeida	bdb4b82885	Introduced harware in-situ testing	2026-07-01 10:02:34 +02:00