| .. |
|
mock
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
sensors
|
Support the legacy towers' DHT11 and fan, and fix the installer's reflash and test steps
|
2026-09-28 14:43:05 +02:00 |
|
ui
|
Add a command to keep taking pictures where the gimbal points, drop unused camera commands, and fit the help on one page
|
2026-09-29 15:48:07 +02:00 |
|
Application.h
|
Set in config.ini whether the tower homes and which mode it starts in, instead of the --init and --start flags
|
2026-09-30 16:42:48 +02:00 |
|
AxisSpeed.h
|
Declare axis speed in degrees per second, not VMAX
|
2026-09-18 15:44:19 +02:00 |
|
Calibration.h
|
Changed heading logic; added snapshot feature
|
2026-09-11 17:42:01 +02:00 |
|
CameraProfile.h
|
Camera settings now come from VimbaX profile XMLs; explicit per-camera config
|
2026-09-04 14:12:05 +02:00 |
|
CameraSettingsXml.h
|
Camera settings now come from VimbaX profile XMLs; explicit per-camera config
|
2026-09-04 14:12:05 +02:00 |
|
CameraStall.h
|
Test the camera with forced dark and bright settings, and recover a camera that stops sending frames
|
2026-09-24 17:35:37 +02:00 |
|
CaptureScheduler.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
ChannelHistory.h
|
Added an expanded connectivity view with MQTT message history
|
2026-09-02 12:39:21 +02:00 |
|
ChannelTopics.h
|
Give the tower three modes, auto, pan and manual, switched by command
|
2026-09-25 17:50:48 +02:00 |
|
CommandParser.h
|
Let a yaw-only tower aim with gimbal move, and stop it publishing a made-up pitch
|
2026-09-29 19:50:39 +02:00 |
|
Config.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
DiagParser.h
|
added gimbal calibration command, added TUI prompts
|
2026-06-29 06:27:36 +02:00 |
|
DumpParser.h
|
Let a tower set its encoder scale, and send no speed after a failed homing
|
2026-09-28 18:21:37 +02:00 |
|
FileLogSink.h
|
Rework the dashboard keys: a/p/m for modes, n for connectivity, page keys to scroll, heading setup in the activity strip
|
2026-09-25 18:57:25 +02:00 |
|
FirmwareConfig.h
|
Let a tower set its encoder scale, and send no speed after a failed homing
|
2026-09-28 18:21:37 +02:00 |
|
Geometry.h
|
Let a yaw-only tower aim with gimbal move, and stop it publishing a made-up pitch
|
2026-09-29 19:50:39 +02:00 |
|
HardwareChecks.h
|
Test the camera with forced dark and bright settings, and recover a camera that stops sending frames
|
2026-09-24 17:35:37 +02:00 |
|
HardwarePresence.h
|
Refuse to start when the rig is missing hardware it declares
|
2026-09-18 14:50:50 +02:00 |
|
Hash.h
|
Camera settings now come from VimbaX profile XMLs; explicit per-camera config
|
2026-09-04 14:12:05 +02:00 |
|
HeadingFit.h
|
Changed heading logic; added snapshot feature
|
2026-09-11 17:42:01 +02:00 |
|
HelpText.h
|
added help info
|
2026-06-23 15:22:31 +02:00 |
|
HostMetrics.h
|
Introduced harware in-situ testing
|
2026-07-01 10:02:34 +02:00 |
|
ICameraSource.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
IControlChannel.h
|
Give the tower three modes, auto, pan and manual, switched by command
|
2026-09-25 17:50:48 +02:00 |
|
IEnvSensor.h
|
added temperature and humidity sensor (SHT41)
|
2026-08-05 09:13:16 +02:00 |
|
IImuSource.h
|
IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup
|
2026-09-09 12:19:53 +02:00 |
|
IMotorController.h
|
Let a yaw-only tower aim with gimbal move, and stop it publishing a made-up pitch
|
2026-09-29 19:50:39 +02:00 |
|
ImagePipeline.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
ImuMount.h
|
IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup
|
2026-09-09 12:19:53 +02:00 |
|
IniEdit.h
|
Add a one-shot test command and a tool that edits the config files safely
|
2026-09-23 18:52:44 +02:00 |
|
JpegXlEncoder.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
Logger.h
|
Take any console command over MQTT, and answer it
|
2026-09-25 16:43:45 +02:00 |
|
MountedImuSource.h
|
IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup
|
2026-09-09 12:19:53 +02:00 |
|
MqttControlChannel.h
|
Give the tower three modes, auto, pan and manual, switched by command
|
2026-09-25 17:50:48 +02:00 |
|
MtiImuSource.h
|
IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup
|
2026-09-09 12:19:53 +02:00 |
|
MtiProtocol.h
|
IMU readings fixed; IMU mounting is part of config.ini; device config verified at startup
|
2026-09-09 12:19:53 +02:00 |
|
OperatingMode.h
|
Set in config.ini whether the tower homes and which mode it starts in, instead of the --init and --start flags
|
2026-09-30 16:42:48 +02:00 |
|
Paths.h
|
Bound the report files too, and only prune what this program generated
|
2026-09-22 18:27:43 +02:00 |
|
PitchSetup.h
|
Changed heading logic; added snapshot feature
|
2026-09-11 17:42:01 +02:00 |
|
RawImage.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
RemoteCommands.h
|
Take any console command over MQTT, and answer it
|
2026-09-25 16:43:45 +02:00 |
|
ScanGrid.h
|
Let a yaw-only tower aim with gimbal move, and stop it publishing a made-up pitch
|
2026-09-29 19:50:39 +02:00 |
|
SerialMotorController.h
|
Support the legacy towers' DHT11 and fan, and fix the installer's reflash and test steps
|
2026-09-28 14:43:05 +02:00 |
|
SettleRule.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
|
SingleInstance.h
|
Added terminal attachment/detachment
|
2026-08-07 17:35:32 +02:00 |
|
TelemetryParser.h
|
Support the legacy towers' DHT11 and fan, and fix the installer's reflash and test steps
|
2026-09-28 14:43:05 +02:00 |
|
TestReport.h
|
Introduced harware in-situ testing
|
2026-07-01 10:02:34 +02:00 |
|
TestRunner.h
|
Test the camera with forced dark and bright settings, and recover a camera that stops sending frames
|
2026-09-24 17:35:37 +02:00 |
|
TmcCurrent.h
|
Convert motor current from milliamps to TMC register values
|
2026-09-17 17:58:45 +02:00 |
|
VimbaCameraSource.h
|
Save raw 12-bit camera frames as 12-bit colour images, keep a waypoint's picture once the image has settled, and hold the scan when saving falls behind
|
2026-10-05 10:14:53 +02:00 |
pgdalmeida
cfd8ba9978
