# Known Issues — Status

This tracks the reproduction blockers and robustness issues identified in the original code and what the
refactor did about them.

## Resolved

| # | Original issue | Resolution |
|---|----------------|------------|
| 1 | Hardcoded config path (`/home/ggs/...`) | Config search order: `--config` → `$FGC_CONFIG` → `./config.ini` → exe dir → XDG ([src/core/Paths.cpp](../src/core/Paths.cpp)) |
| 2 | Hardcoded image output path | `[Paths] output_dir` with `~`/`$ENV` expansion + sensible default |
| 3 | Startup scripts with `~/projects/...` | Replaced by path-independent [scripts/run.sh](../scripts/run.sh) + [systemd unit](../scripts/fire-gimbal-control.service) |
| 4 | Vimba X required to build | `WITH_VIMBA` CMake option (default ON); `OFF` builds a mock-only binary |
| 5 | No hardware path; exits if MQTT down | Mock implementations + runtime toggles; MQTT failure now logs and continues |
| 8 | Plaintext MQTT credentials | `$FGC_MQTT_USER`/`$FGC_MQTT_PW` env override; `config.ini` gitignored |
| 9 | MQTT busy-wait (`while(running);`) | Gone — Paho async client + `set_automatic_reconnect`; no spin thread |
| 10 | `parser()` missing return | Old parser removed; `parseTelemetryLine` returns `std::optional` cleanly |
| 11 | Fragile Boost.Spirit command grammar | Replaced by `parseCommand` whitespace tokenizer ([src/core/CommandParser.cpp](../src/core/CommandParser.cpp)) |
| 12 | Two divergent `config.ini` files | Single committed `config/config.example.ini`; real configs gitignored |
| 6 | Telemetry field order: humidity before temperature | **Obsolete** — migrated to the current firmware's `ST` protocol (encoder counts, no environmental fields); humidity/temp/fan are gone |
| 7 | Trigger fires while `is_moving == 1` (not when stopped) | **Fixed** by the protocol migration — capture is now move → **settle** → trigger; the camera fires only once both axes report standstill at the target ([CaptureScheduler.cpp](../src/core/CaptureScheduler.cpp)) |

Also added along the way: a leveled logger, typed/validated config, an SDK-independent core library, and a
doctest unit-test suite (`ctest`).

## Open / needs hardware confirmation

| # | Issue | Status |
|---|-------|--------|
| 13 | `[Motor]` degrees↔counts calibration | The `config.example.ini` values are **placeholders**. Calibrate `*_counts_per_deg` / `*_zero_count` against real `xenc` readings after homing on the rig. |
| 14 | Capture sweep untested on hardware | Homing was verified live (see below), but the `MOVE → settle → trigger` sweep was **not** run with `--start`. `kSettleTolCounts` (600) and the per-interval timing in [CaptureScheduler.cpp](../src/core/CaptureScheduler.cpp) still need tuning against observed `ST` behaviour, alongside #13. |

## Verification caveats

- **Full build verified on the LattePanda**: a `WITH_VIMBA=ON WITH_MQTT=ON` build compiles and links on the
  device (real Vimba X SDK + Paho fetched). The MQTT wrapper also builds on the dev box (GCC 16 / CMake 4 — see
  `cmake/Paho.cmake` for the toolchain-compat shims).
- **Serial protocol verified live against real firmware** (LattePanda, this session): `ENABLE`/`HOME`/`SPEED`
  reach the firmware, the `ST` telemetry parses with zero unparsed lines across a full session, and a live
  `--init` drove a clean re-home of both axes to `READY`. **Still unverified on hardware:** the capture sweep
  (#14) and real-camera (Vimba) frame capture — earlier tests used `--mock-camera`.
- **Makefile parity** is moot: the Makefile was removed in favour of CMake, and the full
  `WITH_VIMBA=ON WITH_MQTT=ON` CMake build now runs on the device.
- **Demo mode** copies `bin/x64/Release/test_smoke.jxl`, resolved relative to the working directory. Run from a
  directory where that path exists, or extend `ImagePipeline::Params::demo_image`.

## Possible follow-ups (not done)

- Graceful shutdown on SIGINT (currently exit via `exit`/Ctrl-D; a pending `getline` can delay shutdown).
- Make the camera index→label map and JPEG XL defaults fully config-driven.
- Reintroduce optional image upload to the ground station, config-driven (the old hardcoded NFS/SMB upload was
  removed).